When using duplex printing, make settings to use paper from a tray other than the bypass tray. Sheets are feeding in together, resulting in jams.ĭuplex printing cannot be done with paper set in the bypass tray. Alternatively, feed the sheets into the machine one at a time. ĭo not load sheets that have already been copied or printed onto by another machine.įan the sheets thoroughly before loading them. For details about recommended paper and the proper way to store it, see "Recommended Paper Sizes and Types" and "Paper Storage", About This Machine. Use recommended paper only and be sure its storage environment meets the recommended temperature and humidity conditions. The paper is wrinkled or has been folded/creased. See "Recommended Paper Sizes and Types", About This Machine. Push the side fences lightly, and then reset it. The paper tray's side fences are set too tightly. Load paper only as high as the upper limit markings on the side fences of the paper tray or bypass tray. The number of sheets loaded exceeds the capacity of the machine. See "Changing the Paper Size", About This Machine. The tray's side fences might not be locked.Ĭheck the side fences are locked.
On the RPCS printer driver's tab, in the list, select the desired input tray. Some applications print at lower resolution. On the RPCS printer driver's tab, adjust the setting. Information that fits on a single page on one machine may not fit on a single page of another machine. Print areas differ depending on machine used. If you cannot load paper of the correct size, use the reduction function to reduce the image, and then print. Use the same size paper as that selected in the application. You may be using paper smaller than the size selected in the application. Images are cut off, or excess is printed.
HOW TO MAKE MY PRINTER PRINT STRAIGHT DRIVER
Select the correct printer driver and print the file again. Lines of garbled or unwanted alphanumeric characters appear.Īn incorrect printer language might have been selected. If you want to print accurately, set the printer driver to print without using the graphics command. If the printer driver is configured to use the graphics command, the graphics command from the machine is used to print. When printing graphics, the output and the screen are different. See "Cleaning the Dustproof Glass", About This Machine.
On the RPCS printer driver's tab, display the dialog box, ensure that is checked, and then print.Ĭlean the dustproof glass. Printing will be performed by the machine's graphic processing function. The printed image is different from the image on the computer's display.
On the tab, select a proper paper type in the list. For example, thick paper might be loaded but not specified as the paper type. The specified paper type and the paper that is actually loaded might be different. On the RPCS printer driver's tab, in the area, select the document type other than. If the is selected in the printer driver settings, the entire page will be faded when printed. Printing on coarse or treated paper might result in faint print image. Use paper that has been stored in the recommended temperature and humidity condition. The printed image is faded over the entire page. On the tab, select in the list, and then select "Thick 1-2" in the list.
0 kommentar(er)
